info@themilling.com +91-11-49849691

Products

flat belt

Product Details

  • Product Code: FCB
  • Size: According to Requirement
  • Enter Size Here:
  • Download Brochure

    Flat belts are usually made of leather, rubber, and fabric. belts made of leather has a high coefficient of friction thereby ideal for flat belts. To achieve the desired thickness of the belt, a number of layers of belt material are cemented together.

    Usually, the top and bottom layers are made of leather or rubber which has a high coefficient of friction and also it acts as a protective layer. The inside layers are made of canvas, fabric or other material that transmits the majority of the load handled by the belt.

    Properties of a flat belt material

    • The material from which belt is made should have a high coefficient of friction.
    • To withstand the tensions created, the belt material should have high tensile strength.
    • When the flat belt passes through pulley bending stress is induced, to avoid this the material should be flexible and should not be rigid.
    • The material should have water resistance.

    Advantages of flat belts

    • The efficiency of flat belts in 98%, which is equal to that of gears.
    • They have a high load-carrying capacity.
    • They can be employed where high operating speed is required.
    • They produce less noise compared to v-belts.
    • They can absorb shock loads compared to v-belts. 

    FLAT BELT/ TRANSMISSION BELT

    A.

    AV. Tensile strength per 25 mm/ply

    200 kgf. & above

    B.

    Ply adhesion per 25 mm/ply

    100 kgf. & above

    C.

    Elongation under load of 45 Kgf./mm/ply

    4 to 8%

    D.

    Power rating Kw/cm/ply at belt-speed of 5 mtr/sec. For Pulley dia of 250 mm and 180 arc of contract

     

    N.B. Our belts exceed various specifications like BIS: 351/IS: 1370

    THICKNESS OF STANDARD TRANSMISSION BELTING:

    PLY CONSTRUCTION

    NOMINAL BELT THICKNESS

    3 Ply

    3.9 mm

    4 Ply

    5.1 mm

    5 Ply

    6.4 mm

    6 Ply

    7.7 mm

    7 Ply

    9.1 mm

    8 Ply

    10.4 mm

    10 Ply

    13.10 mm

    RANGE OF TRANSMISSION BELTING:

    A. Number of plies

    2 to 10

    B. Width

    25 mm to 1200 mm

    C. Tolerance on roll length

    105 meter +- 5 percent

    Flat belt | flat conveyor belt | flat belt manufacturers | flat belt suppliers | flat belt exporters | flat conveyor belt manufacturers | flat conveyor belt suppliers | flat conveyor belt exporters | flat conveyor belt for flour mill | flat conveyor belt for grain mill | flat belt for flour mill | flat belt for grain mill | best manufacturing flat belt | best supplier of flat belt

    More Information about this product

    Scroll to Top